April 22, 2015

Steve Vick International has introduced two new pipe cutters to its range – one for cutting ‘windows’ and one for circumferential cuts; both developed for cutting ductile iron. Whilst the majority of the existing gas network in the UK is made up of cast iron pipes, there is a significant proportion constructed from ductile iron and steel. These mains pose a problem for utilities when...

April 20, 2015

RSRL Harwell first approached Steve Vick International about the use of their technology to tie down the contamination after initial investigations by Aurora Health Physics revealed higher levels of contamination than anticipated inside the storage tubes. SVI were asked to provide a proposal for the project which was to be one of the most technically challenging foaming operations SVI had...

Niagara Mohawk, a National Grid company, recently undertook a gas mains insertion project in West Albany, upstate New York, which was carried out ‘live’ using a special technique pioneered in the United Kingdom. ‘Live’ mains insertion allows customers to remain on gas throughout the insertion process. The final stage of transferring the old services to the new PE main can then be...

March 22, 2015

Steve Vick International has signed a contract with infrastructure specialists Van Voskuilen Woudenberg b.v. The Dutch company will promote and carry out Live Gas Mains Insertion throughout The Netherlands. Live Mains Insertion is a cast iron mains replacement technique offering maximum operational flexibility. It is similar to the normal insertion of a new PE pipe into an old cast iron main...

March 1, 2015

Steve Vick International has been presented with a ceramic poppy from the “Blood Swept Lands and Seas of Red” display at The Tower of London. The commemorative poppy from the moving and hugely popular installation in 2014 was presented by David Goodall, Senior Vice Chairman of the London, Southern and Eastern Section of IGEM (The Institution of Gas Engineers and Managers) in recognition of...

January 4, 2015

In 2014 Steve Vick International (SVI) achieved first place in the ‘Best application of an innovative solution(s) with tangible savings/benefits – SME’ and were shortlisted for the highly commended ‘Ministers Award’ at the NDA Supply Chain Awards. The award was collected by SVI Nuclear Project Manager, Richard Ditte. Richard was consequently approached by UK Trade and Investment (UKTI)...

January 1, 2015

Steve Vick International’s Contract Service teams have renewed forty 1¼”, 2” and 4” live gas risers in multi storey buildings in the centre of Glasgow without the need to decommission the services whilst the work was in progress. Using their Live Gas Riser Transfer technique, SVI were able to save Scottish Gas Networks tens of thousands of pounds compared with carrying out the project...

November 20, 2014

The Nuclear Decommissioning Authority (NDA) Estate Supply Chain Awards were introduced in 2012 as a mechanism for recognising and rewarding the invaluable contribution of the supply chain within the nuclear decommissioning community. There were 63 nominations this year, and Steve Vick International (SVI) was delighted to be shortlisted for the highly competitive category ‘Best application of...

November 1, 2014

Steve Vick International Ltd has recently completed a project for RSRL Harwell in conjunction with Aurora Health Physics. The project required SVI to design, test and install over 250 Foambags and Foam stoppers into the storage tubes of the BEPO storage block. Once installed and cured, mass void filling of the space behind the Foambags™ could take place. The operations were undertaken to...

July 23, 2013

Steve Vick International has been involved in a pipe sealing project at Sellafield where “a complex set of decommissioning challenges” exist in dealing with the 60 year old First Generations Magnox Storage Pond (FGMSP). The scope of the work covered the removal of redundant pipework in a high radiation area and then cleaning and sealing a contaminated pond wall. The redundant 10cm...

July 1, 2013

Steve Vick International has recently supplied an Automatic Pipe Cutting machine for use on the Greater Trincomalee Integrated Water Supply Project on the north east coast of Sri Lanka. The N600 Keel Cutter is powered by hydraulics to enable a blade to automatically track around the circumference of a pipe wall. In Sri Lanka it will be used to cut through cast iron and steel pipes up to a...

November 12, 2012

Having taken delivery of 18 new high capacity pipe coil trailers manufactured by Steve Vick International, Wales & West Utilities (WWU) report that they are already achieving the anticipated 13% cost savings on PE pipe usage after just six months. What is more, the company are delighted to find that use of the trailers is reducing their carbon footprint by over 400 tonnes per annum –...