Steve Vick approvisionnement Cutters tuyau pour le Sri Lanka

Steve Vick International a récemment fourni une machine de coupe de tuyau automatique pour une utilisation sur le projet d'approvisionnement en eau du Grand Trincomalee intégré sur la côte nord-est du Sri Lanka.

The N600 Keel Cutter is powered by hydraulics to enable a blade to automatically track around the circumference of a pipe wall. In Sri Lanka it will be used to cut through cast iron and steel pipes up to a diameter of 600mm.

Le projet, part funded by the French Government, is being led by the National Water Supply & Drainage Board, Trincomalee. It will provide 65,000 new connections bringing piped drinking water to 330,000 people in this largely agricultural area. When the project is completed, the pipe-borne water supply will be increased from 5.5m gallons to 12 million gallons a day. 90% of the pipes are ductile iron and 10% are steel in the size range 80mm to 600mm.

The machine was purchased on behalf of the National Water Supply & Drainage Board by Lanka Development, a company which specialises in engineering design and execution contracts in the water and sewerage, construction and power sectors in Sri Lanka.

Steve Vick Keel Cutters automatically cut around the circumference of cast iron, fonte ductile, steel, plastique, amiante, cement and other types of pipes from 200mm to 1500mm in diameter. Cutting time is fast with a typical speed of 8 minutes to cut around the circumference of a 300mm cast iron pipe. Only 200mm to 250mm clearance (depending on the model) is required beneath the pipe, minimising the depth of the excavation required and the machine will work even in standing water. The machines are lightweight (20kg/36.5kg)

Complete Unit N450 1 small_5518 Farmoor Water Treatment 009 cropped_5519

Partagez cet article: